supra-mk3.org

HID Xeon Conversion PDF Print E-mail
  
Wednesday, 07 March 2007 20:08

The kit was obtaind from eBay http://stores.ebay.co.uk/xenon-hid-world

These where not the easies thing in the world to fit to popup headlights. Smile

This kit replaces the H4 Bulb with a composit Halogen Diped and a XEON Full Beam, and connects into the loom via the original bulb conector, this means there is some wire to squeez into the already tight light unit and some to feed through the back in a way that doesn't interfear with the lights up/down motion.

Then there was the issue of finding a home for the ballast units, these take the 12v from the car and step that up to 23kv to fire the Xeon. I mounted one on the old Air box mount redundant with the K&N Fitted and the other down the side of the battery, cable tied to the loom, meaning the battery had to be moved across about 3/4 of an inch..

NOTE : I had to swap over the red and black cabled on the wire to the ballast because the supra’s lights seem to be wired with a common positive ??!!


The difference in the light is out of this world!

Click image to open!
Click image to open!
Click image to open!
Click image to open!

Last Updated ( Thursday, 17 July 2008 20:25 )
 

Sponsored Links

Copyright © 2009 supra-mk3.org. All Rights Reserved.
Joomla! is Free Software released under the GNU/GPL License.